CLM Groundwater balance analysis

Abstract

The dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement.

This dataset contains the budget data from the selected 30 groundwater model realisations used for water balance analysis. Realisation index numbers are listed in a text file. Input parameters for every realisation are also provided. Although the raw model outputs are not contained, people can reproduce all the raw outputs using the registered Clarence-Moreton groundwater model together with these input parameters.

Dataset History

The components of the water balance represent a different set of model outputs to the hydrological response variables generated at receptor locations and are therefore not included in the uncertainty analysis reported in companion product 2.6.2 for the Clarence-Moreton bioregion. The water balance analysis was carried out based on 30 model simulations selected from a total of 1847 successful simulations conducted for the sensitivity analysis reported in companion product 2.6.2 for the Clarence-Moreton bioregion. The selection process mainly involves the following steps:

1. Filter models using the forecast water production. Only models with a water production that is within the range from one-tenth of the forecast volume to ten times the forecast volume were used for further analysis.

2. Compute and normalise the head objective function using the observed heads described in the companion product 2.6.2 for the Clarence-Moreton bioregion (Cui et al., 2016).

3. Compute and normalise the baseflow objective function using estimated baseflow at the river stage gauge site near Casino.

4. Rank the models based on the sum of the two normalised components of the objective function described in step 2 and step 3.

5. Conduct a statistical summary analysis using the top 30 models derived in step 4.

Dataset Citation

Bioregional Assessment Programme (2016) CLM Groundwater balance analysis. Bioregional Assessment Derived Dataset. Viewed 27 September 2017, http://data.bioregionalassessments.gov.au/dataset/a9f11fcd-b728-4a48-ab89-1689bc8d888f.

Dataset Ancestors

• Derived From QLD Dept of Natural Resources and Mines, Groundwater Entitlements 20131204

• Derived From Qld 100K mapsheets - Mount Lindsay

• Derived From Qld 100K mapsheets - Helidon

• Derived From Qld 100K mapsheets - Ipswich

• Derived From CLM - Woogaroo Subgroup extent

• Derived From CLM - Interpolated surfaces of Alluvium depth

• Derived From CLM - Extent of Logan and Albert river alluvial systems

• Derived From CLM - Bore allocations NSW v02

• Derived From CLM - Bore allocations NSW

• Derived From CLM - Bore assignments NSW and QLD summary tables

• Derived From CLM - Geology NSW & Qld combined v02

• Derived From CLM - Orara-Bungawalbin bedrock

• Derived From CLM16gwl NSW Office of Water_GW licence extract linked to spatial locations_CLM_v3_13032014

• Derived From CLM groundwater model hydraulic property data

• Derived From CLM - Koukandowie FM bedrock

• Derived From GEODATA TOPO 250K Series 3, File Geodatabase format (.gdb)

• Derived From NSW Office of Water - National Groundwater Information System 20140701

• Derived From CLM - Gatton Sandstone extent

• Derived From CLM16gwl NSW Office of Water, GW licence extract linked to spatial locations in CLM v2 28022014

• Derived From Bioregional Assessment areas v03

• Derived From NSW Geological Survey - geological units DRAFT line work.

• Derived From Mean Annual Climate Data of Australia 1981 to 2012

• Derived From CLM Preliminary Assessment Extent Definition & Report( CLM PAE)

• Derived From Qld 100K mapsheets - Caboolture

• Derived From CLM - AWRA Calibration Gauges SubCatchments

• Derived From CLM - NSW Office of Water Gauge Data for Tweed, Richmond & Clarence rivers. Extract 20140901

• Derived From Qld 100k mapsheets - Murwillumbah

• Derived From AHGFContractedCatchment - V2.1 - Bremer-Warrill

• Derived From Bioregional Assessment areas v01

• Derived From Bioregional Assessment areas v02

• Derived From QLD Current Exploration Permits for Minerals (EPM) in Queensland 6/3/2013

• Derived From Pilot points for prediction interpolation of layer 1 in CLM groundwater model

• Derived From CLM - Bore water level NSW

• Derived From Climate model 0.05x0.05 cells and cell centroids

• Derived From CLM - New South Wales Department of Trade and Investment 3D geological model layers

• Derived From CLM - Metgasco 3D geological model formation top grids

• Derived From State Transmissivity Estimates for Hydrogeology Cross-Cutting Project

• Derived From CLM - Extent of Bremer river and Warrill creek alluvial systems

• Derived From NSW Catchment Management Authority Boundaries 20130917

• Derived From QLD Department of Natural Resources and Mining Groundwater Database Extract 20131111

• Derived From Qld 100K mapsheets - Esk

• Derived From QLD Dept of Natural Resources and Mines, Groundwater Entitlements linked to bores and NGIS v4 28072014

• Derived From BILO Gridded Climate Data: Daily Climate Data for each year from 1900 to 2012

• Derived From CLM - Qld Surface Geology Mapsheets

• Derived From NSW Office of Water Pump Test dataset

• Derived From CLM - NSW River Gauge pdf documents.

• Derived From CLM - New South Wales well completion reports

• Derived From Data for river stage interpolation in the CLM groundwater model

• Derived From CLM - Extent of Lockyer Creek alluvial system

• Derived From CLM - DEM in ascii format

• Derived From CLM - Grafton-Rapville bedrock

• Derived From CLM - Bore water level QLD

• Derived From QLD Coal Seam Gas well locations - 14/08/2014

• Derived From CLM - Orara-Kangaroo bedrock

• Derived From Qld 100k mapsheets - Warwick

• Derived From CLM - Walloon Coal Measures spatial extent

• Derived From Geofabric Surface Catchments - V2.1

• Derived From CLM - Stratigraphic wells in the QLD area of the Clarence-Moreton bioregion

• Derived From CLM16swg Surface water gauging station data within the Clarence Moreton Basin

• Derived From CLM - Queensland well completion reports

• Derived From National Groundwater Information System (NGIS) v1.1

• Derived From Natural Resource Management (NRM) Regions 2010

• Derived From Qld 100k mapsheets - Kingaroy

• Derived From CLM - Stratigraphic wells data from IRTM in the QLD area of the Clarence-Morton bioregion

• Derived From CLM - Basalt extent

• Derived From CLM groundwater model V1

• Derived From Geological Provinces - Full Extent

• Derived From CLM AWRA model

• Derived From CLM - Interpolated piezometric surfaces for Alluvium

• Derived From CLM - Hydraulic conductivity NSW

• Derived From CLM - Coal Bore Holes in QLD region of Clarence-Moreton bioregion

• Derived From CLM Groundwater Model Boundary

• Derived From Clarence-Moreton SEEBASE & Structural GIS Project data.

• Derived From Coal Bore Holes - QLD

• Derived From Qld 100k mapsheets - Beenleigh

• Derived From QLD Department of Natural Resources and Mines Groundwater Database Extract 20142808

• Derived From Qld 100K mapsheets - Inglewood

• Derived From Qld 100K mapsheets - Oakey

• Derived From Qld 100K mapsheets - Toowoomba

• Derived From CLM - Main Range volcanics

• Derived From GEODATA 9 second DEM and D8: Digital Elevation Model Version 3 and Flow Direction Grid 2008

• Derived From CLM - Bore assignments NSW

• Derived From CLM bioregion 3D geological model

• Derived From CLM - Grafton-Piora bedrock

• Derived From Victorian Groundwater Management System Dec 2012 (superseded)

• Derived From QLD Dept of Natural Resources and Mines, Groundwater Entitlements linked to bores v3 03122014

• Derived From CLM - Extent of Richmond river alluvial system May 6th 2014

• Derived From CLM - Lamington volcanics

• Derived From GEODATA TOPO 250K Series 3

• Derived From CLM - Richmond catchment boundary

• Derived From CLM - Streamflow unified NSW

• Derived From CLM - Extent of Richmond river alluvial system February 3rd 2015

• Derived From CLM - Bore assignments QLD

• Derived From Qld 100K mapsheets - Allora

• Derived From Qld 100K mapsheets - Jandowae

• Derived From CLM - NSW Surface Geology Mapsheets in the Clarence-Moreton bioregion

• Derived From CLM - Extent of Clarence River alluvial systems

• Derived From Hydstra Groundwater Measurement Update - NSW Office of Water, Nov2013

• Derived From Formation tops exploration wells

• Derived From CLM16gwl NSW Office of Water Groundwater Licence Extract Clarence Moreton- Oct 2013

• Derived From QLD Petroleum Leases, 28/11/2013

• Derived From CLM - Coal seam gas and petroleum wells

• Derived From NSW Office of Water Groundwater Entitlements Spatial Locations

• Derived From Geoscience Australia, 1 second SRTM Digital Elevation Model (DEM)