ACTGOV Streetlight Cable Assets

This polyline dataset shows the locations of Overhead and Underground Streetlight Cables in the Australian Capital Territory. These assets are either owned or managed by City Services, Transport Canberra and City Services Directorate (TCCS). Assets managed and / or owned privately, by other ACT Government Directorates or by the Federal Government may not be included.The streetlight cables are overhead or buried underground and carry the electrical load to power the streetlight network. There are different types of cables based on the load required to power each streetlight thus higher voltage cables are generally encased in a thicker conduit. The cables are connected to a circuit which is controlled at a controller box. The dataset includes streetlight cables from ActewAGL’s database as of June 30th 2017 in addition to new cables that have been handed over to the ACT Government since then. Attributes include location description, suburb, ownership, maintained by, asset sub type (Overhead Cable, Underground Cable), cable type and conduit, voltage (LOW or HIGH), the status of the cable (ABANDONED or IN SERVICE), when it was installed and the reference information for the source of the data. The cable length is based off the spatial geometry of each feature. These assets are captured and maintained in the TCCS asset database through the works as executed (WAE) handover process or field audits. The information available in this dataset may be incomplete and should not be solely relied upon as a search. Cable locations / alignments generally represent indicative routes rather than being survey accurate. No warranty is given in relation to the data (including accuracy, reliability, completeness or suitability) and no liability accepted (including without limitation, liability in negligence) for any loss damage or costs (including consequential damage) relating to any use of the data. Minor to substantial delays may occur in updating the source data to reflect as-constructed information. This data is generally used for the Dial Before You Dig (DBYD) service and should be used as a guide only.For additional information, please see the relevant municipal infrastructure standard (https://www.cityservices.act.gov.au/plan-and-build/standards-codes-and-guidelines/municipal-infrastructure-design-standards-mis).