In accordance with NSW Government policy, the Council of the City of Ryde is committed to
preparing a Floodplain Risk Management Plan for Macquarie Park. This report documents the
first stage of the process of preparing the Plan – that is, the preparation of a flood study report.
The study area consists of a portion of the Lane Cove River floodplain and those City of Ryde
areas which drain in a northeasterly or easterly direction to it. Much of the 1,558ha study area
is developed. It is crossed by a number of major roads including Epping Road, Lane Cove
Road and the M2 Motorway and the underground Epping to Chatswood railway line.
The consultants drew on both previous flood study reports and additional community
consultation to review historical records about flood problems that have been experienced in the
catchment and this process found that the two most widely reported floods were in November
1984 and February 1990.
Computer-based (DRAINS) hydrologic models and (TUFLOW) hydraulic models have been
developed. While substantial efforts have been made to compile as best a picture as possible
of several relatively recent floods (i.e. November 1984 and February 1990), the resultant rainfall
and water level data sets were found to provide only very general information about the floods.
As a consequence, while the models generally reproduce the observed flood regimes, formal
calibration against those events was not possible. The modelling confirmed that the November
1984 event was worse than the February 1990 event and significant number of properties in
natural depressions experienced overland flow inundation. Additionally, some properties
located adjacent to open creek channels experienced substantial depths of water.
Design flood event modelling followed and this report presents the results of modelling the
20 year average recurrence interval (ARI) flood, the 100 year ARI flood and the Probable
Maximum flood (PMF).
The detailed DRAINS and TUFLOW models provide a sound platform for the further flood
modelling tasks that will be undertaken during preparation of the Floodplain Risk Management
Study and Plan.
SOFTWARE
The DRAINS software (Reference 7) has principally been used to model the hydrologic regime
of the study area. It is a comprehensive hydrologic modelling program for designing and
analysing various types of catchments and urban stormwater drainage systems and includes
hydraulic modelling capabilities for pipes and overland flowpaths. The software is widely used
in Australia and Council itself has used DRAINS for many years.
The DRAINS model version is 2009.06.
While it follows that DRAINS software is suitable for undertaking both hydraulic and hydrologic
assessments of urban catchments – and both capabilities have been used in this study – it is
important to note that the pipe hydraulic analysis undertaken within the subsequent hydraulic
modelling phase (refer Chapter 4) provides a more comprehensive picture of both pipe and
overland flow rates.
The widely used and Australian developed TUFLOW software (Reference 6) was chosen as
the hydraulic modelling tool for use in the study because of its capability to simulate flood flows
along both open watercourses and potentially complicated networks of overland flowpaths such
as occurs in the study area.
The technical description of the TUFLOW model and its specific application to the study area is
provided in Appendix C. The TUFLOW build model is 2008-08-AF- ISP.
The following sections of the report describe the establishment and operation of the TUFLOW
model to simulate:
the November 1984 and February 1990 events using DRAINS-derived flows. The
simulated flood levels and extents for this event were then compared with the historical
information; and
the design 5 year, 20 year, 50 year, 100 year ARI and PMF events.
