From Australian Oceans Data Network
JSON RDF ISO19115-3 XML

Gaseous elemental mercury measurements of boundary layer air made by a Tekran 2537 during the SIPEX II voyage of the Aurora Australis, 2012

Created 12/03/2025

Updated 12/03/2025

JSON RDF ISO19115-3 XML

Instrument description: Gaseous elemental mercury (GEM) was measured at five minute intervals. GEM was collected and analysed on two parallel gold traps. While GEM was collected on one gold trap, the mercury on the other traps was simultaneously being thermally desorbed and detected by a cold vapour atomic fluorescence spectrometer. The Tekran was calibrated approximately every 24 - 48 hours using an internal Hg permeation source. The internal calibration source was checked prior to shipping the instrument to Australia using an external Hg source. The internal calibration source will be verified upon return of the instrument.
Instrument Setup: This instrument was sampling from a weather protected inlet positioned ~3 m off the front port side of the Monkey Deck of the Aurora Australis, directly above the bridge. The 35m heated Teflon sample line end and filter is contained within the "Ned Kelly", a large (~30 cm diameter) stainless steel can which protects against rain, snow, sea spray and major impacts. This sample line ran 25m down to the Tekran instrument which was located in a the Met-Lab. Ar (99.999% purity) was fed into the MetLab via quarter inch Teflon tubing from the oxygen store on the Monkey deck. A 2D R.M. Young (model 5305-AQ) anemometer was also deployed at the same elevation on the aft side of the sample inlet. The anemometer was oriented with zero degrees pointed directly forward of the ship. Mean Wind speed and direction were captured using Campbell Scientific CR1000 datalogger at five-minute intervals. The files included in this dataset are the raw outputs from the Tekran 2537. They include headers, though not always at the top of the file, because headers are only written when the instrument is started or after recalibration. Also included are scanned log books containing meteorological observations, maintenance notes, and when adjustments were made to the sample line (which alters anemometer data).

Files and APIs

Tags

Additional Info

Field Value
Title Gaseous elemental mercury measurements of boundary layer air made by a Tekran 2537 during the SIPEX II voyage of the Aurora Australis, 2012
Language eng
Licence notspecified
Landing Page https://devweb.dga.links.com.au/data/dataset/f9a2b3c8-ec65-45f1-9df1-28207d3513e2
Contact Point
CSIRO Oceans & Atmosphere
metadata@aad.gov.au
Reference Period 14/09/2012 - 05/11/2012
Geospatial Coverage {"type": "Polygon", "coordinates": [[[119.0, -67.0], [150.0, -67.0], [150.0, -42.0], [119.0, -42.0], [119.0, -67.0]]]}
Data Portal data.gov.au

Data Source

This dataset was originally found on data.gov.au "Gaseous elemental mercury measurements of boundary layer air made by a Tekran 2537 during the SIPEX II voyage of the Aurora Australis, 2012". Please visit the source to access the original metadata of the dataset:
https://devweb.dga.links.com.au/data/dataset/gaseous-elemental-mercury-measurements-of-boundary-layer-air-made-by-a-tekran-2537-during-2012

Original dataset
Dataset copies

No duplicate datasets found.