Woolloongabba (South East Queensland) 2015...

Period of operation: 1 January to 31 December 2015 (no PM10/PM2.5 data after 30 March and temperature/humidity data after 29 July due to instrument faults. Adjacent construction work prevented safe access to the station to replace the faulty equipment.)
Site location: Latitude: -27.4975; Longitude: 153.0350
AS/NZS 3580.1.1 site classification: Peak (roadside)
AS/NZS 3580.1.1 compliance (pollutants): Complies fully
AS/NZS 3580.14 compliance (meteorology): Complies, except for:

• 4 storey building located within 10 metres west of the monitoring site (no obstructions in direction of roadway).

Wind: Ultrasonic sensor

• Height above ground level: 10 metres.
• The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value.

Temperature: Capacitive ceramic sensor
Relative humidity: Capacitive thin film polymer sensor
Oxides of nitrogen: Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1

• Instrument output offset and/or scaled based on calibration and daily zero/span response data.

Carbon monoxide: Infrared absorption analyser operated in accordance with AS 3580.7.1

• Instrument output offset and/or scaled based on calibration and daily zero/span response data.

PM10/PM2.5: Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13

• The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter.
• Reported concentrations are uncorrected instrument output values.
• The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals.
• Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.