Jondaryan (Jondaryan) 2016 hourly air quality...

Air Quality Monitoring - 2016

Created 24/02/2025

Updated 08/04/2025

Period of operation: 1 January to 31 August 2016 (site closed)
Site location: Latitude: -27.3713; Longitude: 151.5934
AS/NZS 3580.1.1 site classification: Neighbourhood
AS/NZS 3580.1.1 compliance (pollutants): Complies fully
AS/NZS 3580.14 compliance (meteorology): Complies, except for:

  • Wind, temperature, relative humidity, rainfall and barometric pressure sensors located 10 metres above ground level.
  • Rainfall measured by acoustic sensor

Wind sensor: Ultrasonic sensor

  • The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value.

Temperature: Capacitive ceramic sensor
Relative humidity: Capacitive thin film polymer sensor
Rainfall: Vaisala RAINCAP® precipitation sensor.
Barometric pressure: Capacitive silicon sensor.
PM10/PM2.5: Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13

  • The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter.
  • Reported concentrations are uncorrected instrument output values.
  • The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals.
  • Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.

TSP: Tapered Element Oscillating Microbalance (TEOM) Model 1405 fitted with TSP inlet and operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements)

  • Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter.
  • Reported concentrations are uncorrected instrument output values.
  • Negative hourly TSP concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.

Source

This data file or API can be downloaded from:

https://www.data.qld.gov.au/dataset/fc8d4550-1d2f-4e56-a2db-7b5f11b903ed/resource/98a77c50-5ac8-4f01-abb3-6b1e9509ea5a/download/jondaryanaq2016.csv